Who has the highest horse power here

[chrisr62001]

Ok guys and gals I know what your thinking. Just another useless post!! I get it. Humor me please!!

03 mustang cobra coupe 367 rwhp stock.

[Dellcobra]

It is not how much power, but how much you can use and how well you use it.

Dell

[Greg@SVTOA]

I'm sure I'm down the list compaired to the 03-04 guys but I'm making 502 horses at the wheels with 11 PSI and 19 degrees total advance with 93 unleaded pump gas...

http://www.midwestmustangassociation.com/vb3/photopost/data/505/1502hp-med.jpg

[SVT_KY]

dayum dyno queens ... :) I'm with Dell !!!

[Greg@SVTOA]

My Dyno Queen runs 11.50's on drag radials...

Clicky for my dyno queen running 11.50's (http://www.videohost.org/uph/upl/UP81144.wmv)

[Dellcobra]

But can it stop and make a very fast left or right turn?

Dell

[Greg@SVTOA]

But can it stop and make a very fast left or right turn?

Dell

Yes and Yes Dell. ;)

http://www.mach1media.org/images/brembokit2.jpg


http://www.svtownersassociation.com/photopost/data/503/12roadamerica1-med.jpg

[Greg@SVTOA]

Anymore dyno queen comments? ;)

[DOUGS48]

Went to swanson performance shop and had a 2.80 pulley installed and I am now up to 458 rwhp and 475 rwtorque what a difference and I thought it was quick before hold on momma daddys coming

[Greg@SVTOA]

I guess they got quiet about the Dyno Queen stuff. ;)

[chrisr62001]

You guys are not going to believe this!!! I dynoed my car again today and came up with 400.2 rwhp sae corrected stock!!!! They ran it again and same result. The company sold me a K&N air filter and dynoed the car again and came up with 425.8 rwhp sae corrected!! I must have gotten a good one from the factory!

[dwtalso]

Nice, Greg! What power adder are you using? Looks like roots/screw torque curve rather than a centri curve.

Oh, back OT: I'm at (SAE) 465 rwhp / 502 rwtq...that's be about 484/522 using STD correction :)

[Greg@SVTOA]

Nice, Greg! What power adder are you using? Looks like roots/screw torque curve rather than a centri curve.

Oh, back OT: I'm at (SAE) 465 rwhp / 502 rwtq...that's be about 484/522 using STD correction :)


It's a Vortech SQ Trim actually...! :bna

[dwtalso]

Cool, bad guess on my part :). The linear power curve had me going the one way but a lot of the centris I've seen lately seem to have a little more peaky torque curves so I went the other way :shrug: :). Just proves one can't judge a nice setup by it's boost curve ;).

Is that on a built 302 or stock block? Forgive me for being nosy but I have also run across several very high output, stock bottom ended, boosted 302s and they are very impressive :).

[99_Venom]

Hey Dyno Queen Greg,
Nice shot of you coming around the corner with the Viper where he belongs. :cool:

Went to the Dyno today. It was a Mustang Dynamometer and I pulled 347.42 RWHP and 385.40 RWTQ with the 125 shot. The first time they made the pull when the nitrous hit it climbed the rollers and he had to let out of it and strap it down a little better. WOW that was scary to watch my car jump like that. The tires were putting out a little smoke through the runs and you could see the variance in the engine/vehicle speed. That was with the ET Streets. Yesterday I had a chance to hit it with a fresh bottle, the ET Streets, new poly bushings in the IRS and rear control arms, and 50* temps. I just punched it from a 5mph roll. It pulled so hard I had trouble seeing the tach, the numbers were blurry. Good thing I have a shift light :eek:

[coleman]

609/560 ... and I'm having a lot of fun trying to get it to the ground.

[slow lane]

Anymore dyno queen comments? ;)

Yep, why post STD conversion?


Seem's like cheatin your way over 500.

I'm at 490 SAE RWHP / 480 SAE RWTQ (502/492 STD). I'm waiting impatiently for Metco or Billetflow to run some smaller 10 rib blower pulleys.

Seriously folks, Greg whipped my ass at GLD when his car had a bunch less power than mine. He convinced me to get drag radials and practice. Now that we've both upped the ante and have about equal power levels and I have more experience, he'd almost certainly whip me by a bigger margin.

[Twiceblown 351]

1993 Lightning twin turbo 393 15LB of boost = 650WRHP and 725RWTQ on pump gas.= 10.50 at 134.00.ANd I still have A e4od Trans in it.

[RevMatt]

Went to swanson performance shop and had a 2.80 pulley installed and I am now up to 458 rwhp and 475 rwtorque what a difference and I thought it was quick before hold on momma daddys coming
:jawdrop:
Sounds like a fun ride!!! :tmb:

[justice]

2.8 upper Steeda interchangeable

RWHP = 464
RWT = 485

was higher on the first runs but was way too lean.
a/f adjustments resulted in just under 12.0
15 lbs boost

and that's

justice :beer:

signature shows ratings with stock pully and no chip.

[HalfTime]

299 on a Mustang Dyno, 80*F and humid, Vortech S/C 10lbs, 93 octain, 65 wet shot N2O.

SVT Focus, 12.36 111.5

Well, I know it's not much compared to the big boys in here, but then again, my car only waighs in at 2650.

[Buckshot77]

Nice numbers. I'm sitting at a lowly 341 front wheel horsepower on the contour. I am really hoping my extra work this winter rewards me with some 400+ numbers.

Rick

[dwtalso]

Those are great numbers on those small motors :).

I realized I haven't updated mine since I put the KB on. She's putting down (SAE) 566 rwhp / 496 rwtq right now :).

[sicboy]

03 cobra 2.2 kb

[96CobraLady]

529.8 RW and no matter how much gas I have in the tank and how new and big my tires are, I don't get to use it all. I've forgotten what 1st gear is like! If anyone learns of any magic traction secrets let me know. It may not be the fastest around here, but it's the fastest girl car, right?

Anyway, hi, I'm new on here! SC, TB, Exhaust on black 96 Cobra.

:hrs: Aria

[04cobravert1975]

Mine is making 496, and 508 tq, with 2.76 pulley, exhuast, tune, ford gt pumps, 100 mm idlers, lfp filter, LFP intercooler reservoir and HE, Kooks Longtubes. It made 449 to the wheels off stock pulleys, tune and catback.

[crimson ii]

Back in August with not so good air mine made 460 rwhp & 445 rwtq
with only 500 miles on it pure stock. Not a single mod.

Made 400 lb ft tq + @ rear wheels from 2700 through 6,000