View Full Version : Throttle Body and Intake Plenum
BilletFlow
11-21-2002, 05:44 AM
Click on me (http://www.svtperformance.com/forums/showthread.php?s=&threadid=23338)
JT COBRA
11-22-2002, 08:16 AM
Here is a picture of the Paul's High Performance
amazing throttle response!!!!!!!!!!!!!!!!!!!!!!!
for more info email me
best et 11:55 @120 consistant 11:70's on nittos
BilletFlow
11-22-2002, 11:49 AM
Nice Throttle responce eh?
How much gains (HP TQ) did you get JUST from Paul's setup.
I mean Just by adding his kit?
Not adding his Kit plus a cai, exhaust ect:
Plus I like how Paul's '03 Cobra Nose Cover w/ Pulley is Worth an additional 50+ horsepower , 75+ lb/ft of torque.
and
PHP '03 Cobra Throttle Body & Supercharger Inlet (With his Cobra Nose Cover & 5# Pulley we've seen up to 50 horsepower and 75 lb/ft of torque.)
So if JUST the nose cover gives you 50HP and 75lb/ft of torque
and if you ADD the Throttle Body & Supercharger Inlet you still get 50HP and 75lb/ft of torque.:wtf:
So what Paul is saying is that HIS Throttle Body & Supercharger Inlet nets you 0.0HP and 0.0lb/ft of torque.
WOW $829.00 for ZERO HP AND ZERO TQ....What a deal:huh:
IMHO he needs to give a bottle of synthetic oil with every order...IMHO
Doug
BilletFlow
Here's the BilletFlow Throttle Body and Super Charger Plenum
ObieFox
11-22-2002, 04:44 PM
Nitrous Pete only picked up 4 RWHP with Pauls TB and inlet elbow. A little more than "0":D but not nearly enough for $800+
Take care,
Kevin
BilletFlow
11-22-2002, 06:19 PM
Originally posted by ObieFox
Nitrous Pete only picked up 4 RWHP with Pauls TB and inlet elbow. A little more than "0":D but not nearly enough for $800+
Take care,
Kevin
So this was a real world test eh?
I bet Pete is pissed.
I'll buy PHP set up off of Pete, for $50.00 and sell Pete one of my TB Kits.
Hell I'll even extend the offer to JT COBRA!
BilletFlow
11-24-2002, 02:04 AM
Originally posted by BilletFlow
So this was a real world test eh?
I bet Pete is pissed.
I'll buy PHP set up off of Pete, for $50.00 and sell Pete one of my TB Kits.
Hell I'll even extend the offer to JT COBRA!
Ok Ok .... $75.00....... come on JT COBRA....I knowyou want to:p
JT COBRA
11-25-2002, 08:32 AM
sorry i got 23hp 20 TQ
real world testing is the track
went from 11:90's to 11:70's on nittos
run it at SC where were you
did you go to the Nationals Bowling Green
running 11:50's now
let me know ??????????
havn't custom tuned a chip yet
BUT thanks for the Offer
JEFF
sent me one for testing and I'll test it if theres
an improvement I'LL buy
JT COBRA
11-25-2002, 08:59 AM
why dont you send one to pete and see what he says
Thanks
JEFF:wtf: :wtf: :wtf:
Elapidae
11-25-2002, 09:04 AM
Or send one to me :D
Anyone here dyno the Accufab against the BilletFlow yet? Offhand I favor the BilletFlow. Appears to be superior in craftsmanship. The Accufab does have price in its favor however...
BilletFlow
12-02-2002, 02:32 PM
Originally posted by ox03
Anyone here dyno the Accufab against the BilletFlow yet? Offhand I favor the BilletFlow. Appears to be superior in craftsmanship. The Accufab does have price in its favor however...
Ok … just for clarification
Disclaimer: The following information is accurate to the best of my knowledge as of 12-01-2002
Paul’sHP uses an Accufab "Elliptical" Throttle Body and a welded Plenum made by a Fabrication shop in Michigan.
TB: Polished (blade, brushed finish)
Plenum: powder coated
“Cost: $829 Installation: $80”
Accufab uses it's own "Big Oval" (similar to the Lightning) Throttle Body and the Plenum is a new, redesigned casting.
TB: Polished (blade, brushed finish)
Plenum: powder coated or polished ($50 extra)
“$689.00”
BilletFlow uses our own Throttle Body (similar to the Lightning) and the Plenum is a new, redesigned casting.
TB: Anodized (clear, blue, red, black, yellow) and custom engraved with “COBRA”
(blade, polished finish)
Plenum: powder coated the same color as the stock Plenum for a stock look.
“$849.00” Installation: if you come by the shop, I’ll put it on for free(15 min job, including setting the TPS and Idle ).
2nd Disclaimer: IMHO
I believe the "Accufab Throttle Body and Plenum" AND the “BilletFlow Throttle Body and Plenum” both, flow more then Paul’s and will make more Hp and Tq then Paul’s.
As far as performance differences between Accufab and BilletFlow, I think they should perform the same, as in no benefit one way or the other.
Doug
BilletFlow
P.S. But ours look waaaaayyyyy better;) :p ;) :p
PHP stocks/sells some seriously overpriced products.
> if you come by the shop, I’ll put it on for free
Too bad you are nowhere near Los Angeles, CA. Otherwise you would have made a sale today =>).
BilletFlow
12-02-2002, 03:44 PM
Originally posted by BilletFlow
Installation: if you come by the shop, I’ll put it on for free(15 min job, including setting the TPS and Idle ).
It's that easy! But you do need a volt meter and some basic hand tools.
JT COBRA
12-05-2002, 06:36 AM
if your in Taylor how come I never see anyone
testing this at the Milan Dragway????
I go there every week until they closed!!!!!!!!
This sounds like a great magzine article!!!!!!
WHAT DOES EVERYONE THINK???????
DYNO AND GO TO TRACK
LOVE THIS FORUM
THANKS
JEFF
By way race parts have to work not look pretty!!!!
LOL
BilletFlow
12-05-2002, 06:58 AM
But it's even better when they WORK and "LOOK PRETTY"
Check out our web site to see independently ran dyno graphs.
JT Cobra…Did you just say our stuff looks pretty? I think you did!….Thank you
BilletFlow Web Site (http://www.billetflow.com)
about milan:
We are just now starting to crank these things out .... keep your eyes peeled next season.
Doug
BilletFlow
LFacemire Jr
12-06-2002, 07:07 PM
I did see one on a car at Milian and the guy even had an extra one on the front seat trying to sell it to 03 owners, It looked good but I did not see the car run..As for PHP's yes they are expensive! but I do belive they are a top quality shop and offer ALOT of knowledge to go along with their products. After all they do sell more than just throtle bodies...Speaking of throtle bodies has anyone tested the twin 65 BBK, they claim 35rwhp?
seems theres more and more add's on here promoting stuff(like commericals)..... :bash:
BilletFlow
12-07-2002, 08:14 PM
Originally posted by LFacemire Jr
[It looked good but I did not see the car run..As for PHP's yes they are expensive! [/B]
The "car" had K&N, no mufflers, and the BilletFlow TB Kit. it ran 12.8's
He also could not see the finish line so he lifted before the finish line!
If your who I think you are , your wife ran against us, 1 run.
BTW: excellent color choice(I love the Sonic Blue)
Doug
BilletFlow
LFacemire Jr
12-07-2002, 09:10 PM
Do you have any dyno sheets on the TB? I want one but the 800.00 combination is alot.:tmb: BTW it did look top notch....and yes my wife did make a few passes that night.
BilletFlow
12-07-2002, 09:38 PM
you'll see 10-15 Hp and 10-15Tq
we have 2 dyno sheets up on the website
Doug
BilletFlow
03Kobra
04-28-2003, 07:01 PM
are these still for sale, I have not seen anything on them in a while?
Hunter
04-28-2003, 07:49 PM
Originally posted by 03Kobra
are these still for sale, I have not seen anything on them in a while? Yes they are still for sale. AmazonRacing.com has a special on them right now. You can find the special @ www.svtperformance.com go to the "Terminator" section, then go to the Amazon Racing section. He has them listed there.
Disclaimer *** I am in no way affiliated with Amazon Racing. I just saw the special running and am trying to help anyone interested in the TB out.
MMS331
04-30-2003, 09:37 AM
We are doing a dyno run on a 03 cobra adding the Accufab throttle body to it and I can post the dyno results if you would like for me to or if I'm allowed to post the results to let anyone interested in the accufab's numbers.
Wendy
POIZNIS
04-30-2003, 11:32 PM
Im running the Accufab Throttle Body and Power Inlet and I love it. The throttle response is immediate and the flow of air is amazing. I think Accufab builds a superior product, my buddy just took off his Billet Flow because it was giving him idle problems and wouldnt open up well at high rpm's.
goodquest
05-01-2003, 09:23 AM
Originally posted by BilletFlow
you'll see 10-15 Hp and 10-15Tq
we have 2 dyno sheets up on the website
Doug
BilletFlow
Web site seems to be down, anyone else having this problem?
RosSVT
05-01-2003, 11:01 AM
Yup!
Hunter
05-06-2003, 05:34 PM
Originally posted by Hunter
Yes they are still for sale. AmazonRacing.com has a special on them right now. You can find the special @ www.svtperformance.com go to the "Terminator" section, then go to the Amazon Racing section. He has them listed there.
Disclaimer *** I am in no way affiliated with Amazon Racing. I just saw the special running and am trying to help anyone interested in the TB out. I just bought a new BilletFlow TB and it is a work of art. Could not be happier.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.